Dispersion: After the cement is mixed with water, due to the hydration of the cement particles, a double electric layer structure is formed on the surface of the cement particles, causing a solvated water film to be formed, and the opposite charge on the surface of the cement particles causes association between the cement particles. , causing the cement slurry to form a flocculation structure, causing 10% to 30% of the mixing water to be wrapped in the cement particles and unable to participate in free flow and lubrication, thus affecting the fluidity of the concrete mixture. When the water-reducing agent is added, the water-reducing agent molecules can be directionally adsorbed on the surface of the cement particles, so that the surfaces of the cement particles have the same charge (usually negative charge), forming electrostatic repulsion, which promotes the mutual dispersion of the cement particles and the disintegration of the flocculation structure. , releasing part of the wrapped water to participate in the flow, thereby effectively increasing the fluidity of the concrete mixture.
Lubricant effect: The hydrophilic group in the water-reducing agent is very polar, so the adsorption film of the water-reducing agent on the surface of the cement particles can form a stable solvated water film with water molecules. This water film has a good lubrication effect. , can effectively reduce the sliding resistance between cement particles, thereby further improving the fluidity of concrete.
Steric hindrance: The hydrophilic branched chains in the superplasticizer structure extend in the aqueous solution, thereby forming a hydrophilic three-dimensional adsorption layer with a certain thickness on the surface of the adsorbed cement particles. When the cement particles are close to each other, the adsorption layers begin to overlap, that is, steric hindrance occurs between the cement particles. The more overlap, the greater the steric repulsion, and the greater the obstruction to the cohesion between cement particles, causing the concrete to collapse. The temperature remains good.
Slow-release effect of grafted copolymer branched chains: During the preparation process of new water-reducing agents such as polycarboxylate water-reducing agents, some branches are grafted on the molecules of the water-reducing agent. This branched chain can not only provide space Moreover, in the high alkalinity environment of cement hydration, the branch chain can be slowly cut off, thereby releasing polycarboxylic acid with dispersing effect, which can improve the dispersion effect of cement particles and control slump. Drop loss.
The mechanism of action of water reducing agent
May 04, 2024
Leave a message
