It is the earliest used in my country. It is the product of naphthalene sulfonation through sulfuric acid and then condensation with formaldehyde. It is an anionic surfactant. The appearance of this type of water reducing agent can be light yellow to dark brown powder depending on the product. It is easily soluble in water and has good dispersion effect on many powder materials such as cement. The water reducing rate can reach 25%.
Preparation:
The synthesis route of naphthalene sulfonate water reducing agent is as follows: naphthalene → sulfonation → hydrolysis → condensation → neutralization → filtration → drying → product
The production raw material is naphthalene. First, concentrated sulfuric acid is used for sulfonation reaction. The molar ratio of naphthalene to sulfuric acid is 1:1.3-1.4. The temperature is 160-165℃, and the reaction time is 3h. Then the reactant is cooled to 120°C for hydrolysis. At this time, 13-naphthalenesulfonic acid is stable, while d-naphthalenesulfonic acid is easy to hydrolyze, thus reducing the amount of b-naphthalenesulfonic acid to facilitate the next step of polycondensation reaction. Hydrolysis time About 30min. Condensation reaction is an important reaction in the production process of b-naphthalene sulfonate superplasticizer. At a certain temperature, sulfonated naphthalene and formaldehyde are condensed to form a polymer compound. This reaction strongly affects the performance of the product. In order to find the optimal process parameters, the uniform design method was used to examine the effects of three factors: condensation time, condensation temperature, and the ratio of formaldehyde and naphthalene on product performance. The optimal conditions for temperature are 104°C; the optimal conditions for reaction time are 6 hours; the optimal conditions for formaldehyde dosage are 0.75; the maximum expected theoretical value is 18.3.
What is naphthalene sulfonate water reducing agent?
May 06, 2024
Leave a message
