Polycarboxylic Acid Superplasticizer PCE Powder

Polycarboxylic Acid Superplasticizer PCE Powder is made of a variety of high molecular weight organic compounds, and is a carboxylic acid graft copolymer high-efficiency water reducer. Polycarboxylic acid powder for dry mortar is a new generation of environmentally friendly concrete admixture with world-leading level. Polycarboxylic Acid Superplasticizer PCE Powder water reducer has reached the current international advanced level in terms of technical performance indicators and cost performance. Polycarboxylic Acid Superplasticizer PCE Powdercan be widely used in water conservancy, electricity, port engineering, railways, bridges, culverts, highways and various projects, and concrete pouring of the main structure of civil buildings.

Polycarboxylic Acid Superplasticizer PCE Powder can make the mortar water reduction rate reach more than 20%, and greatly improve the fluidity of the mortar under the condition of the same water addition amount;

Polycarboxylic Acid Superplasticizer PCE Powder can improve the early strength of the mortar, improve the ultimate strength, and is the best choice for various applications requiring rapid curing;

Polycarboxylic Acid Superplasticizer PCE Powder reduce the water-binder ratio of the mortar, improve durability, reduce shrinkage and creep deformation, and reduce shrinkage and cracking in the late stage of mortar curing;

Polycarboxylic Acid Superplasticizer PCE Powder has no pollution to the natural environment is generated during the production process; in line with ISO14000 environmental protection management.

Polycarboxylic Acid Superplasticizer PCE Powder is a polycarboxylic acid enhanced water-reducing agent specially used for dry-mix mortar. This product has good adaptability with cement and other admixtures. Polycarboxylic Acid Superplasticizer PCE Powder is widely used in cement-based dry-mix materials such as cement non-shrinkage grouting/mechanical grouting, repair mortar, cement-based floor mortar, waterproof mortar, grouting agent and polystyrene particle insulation mortar. It is very helpful to improve the fluidity of mortar, increase the early and late strength of mortar, and reduce the shrinkage and cracking of mortar in the late curing period. In addition, this product can also be used in gypsum-based dry-mix materials, refractory materials and ceramic products.

For Polycarboxylic Acid Superplasticizer PCE Powder, the recommended dosage in various dry-mix materials is 0.2-0.3% of cementitious materials.

1. For Polycarboxylic Acid Superplasticizer PCE Powder, it is powder form,this product is 25 kg/bag;

2. According to customer requirements, large bag packaging or special packaging can be provided.

3. Polycarboxylic Acid Superplasticizer PCE Powder should be stored in a dry environment at room temperature (below 40°C), avoiding stacking or heavy pressure to prevent the product from agglomerating.

4. The storage stability of this product in the original packaging should be maintained for 12 months. Once the original packaging is opened, it should be put into use within 60 days.
5. This product Polycarboxylic Acid Superplasticizer PCE Powder is transported as a general chemical product.

For Polycarboxylic Acid Superplasticizer PCE Powder, during the experiment or after its completion, if you have any questions, opinions or suggestions, please feel free to contact our sales or technical staff at any time, or leave a message on our WeChat official account. Shanxi Jiankai Fine Chemicals Co.,Ltd is dedicated to serving you.

Service hotline: +86-359-6364858

Technical support: +86-19335942828

After-sales customer service: +86-19335942828 

Email: info@sxjkchemicals.com