In the realm of water treatment, Polyaluminium Chloride (PAC) has emerged as a highly effective and widely used coagulant. As a PAC supplier, I've witnessed firsthand the growing demand for this versatile chemical. One of the most frequently discussed topics among our clients is the relationship between the basicity of PAC and its performance in water treatment. In this blog, I'll delve into this topic, exploring how basicity affects PAC's functionality and its implications for water treatment processes.
Understanding Polyaluminium Chloride and Basicity
Polyaluminium Chloride, often abbreviated as Polyaluminium Chloride PAC, is a pre - hydrolyzed, inorganic polymer coagulant. It is characterized by its high charge density and ability to effectively remove suspended solids, organic matter, and other contaminants from water. The basicity of PAC is a crucial parameter that describes the degree of hydrolysis of the aluminum chloride in the PAC. It is defined as the molar ratio of hydroxyl ions (OH⁻) to aluminum ions (Al³⁺) in the PAC, usually expressed as a percentage.
Mathematically, basicity (B) is calculated using the formula: (B=\frac{[OH]}{3[Al]}\times100%), where ([OH]) represents the concentration of hydroxyl ions and ([Al]) represents the concentration of aluminum ions.
How Basicity Affects the Structure of PAC
The basicity of PAC significantly influences its chemical structure. At low basicity values, PAC mainly consists of small - sized, highly charged aluminum species such as (Al^{3 +}), (Al(OH)^{2+}), and (Al(OH)2^+). These small species have a high charge density, which allows them to neutralize the negative charges on colloidal particles in water through electrostatic attraction. As the basicity increases, the aluminum species start to polymerize, forming larger and more complex poly - aluminum hydroxides. At high basicity levels, PAC contains large - sized, polynuclear aluminum species like (Al{13}) and other high - molecular - weight polymers.
Impact on Coagulation and Flocculation
Coagulation
Coagulation is the first step in the water treatment process, where the destabilization of colloidal particles occurs. The basicity of PAC plays a vital role in this stage. Low - basicity PAC is more effective in coagulation when dealing with waters that have a high negative charge on colloidal particles. The small, highly charged aluminum species can quickly neutralize these negative charges, causing the colloidal particles to come closer together and form small aggregates.


On the other hand, high - basicity PAC is better suited for waters with a lower negative charge density. The large polynuclear aluminum species in high - basicity PAC can bridge the colloidal particles through adsorption and inter - particle bridging mechanisms. This leads to the formation of larger and more stable flocs, even in waters where electrostatic repulsion is not the dominant factor.
Flocculation
Flocculation is the process of aggregating the coagulated particles into larger flocs that can be easily removed by sedimentation or filtration. High - basicity PAC is generally more effective in flocculation. The large - sized poly - aluminum hydroxides can entrap and enmesh the colloidal particles, forming larger and heavier flocs. These flocs settle more rapidly, reducing the time required for sedimentation and improving the overall efficiency of the water treatment process.
Influence on Water Quality
The basicity of PAC also affects the quality of the treated water. Low - basicity PAC may leave a higher residual aluminum concentration in the treated water. This is because the small aluminum species are more soluble and may not be completely removed during the treatment process. High - basicity PAC, on the other hand, tends to reduce the residual aluminum content. The large - sized polymers are more likely to be removed along with the flocs during sedimentation or filtration.
In addition, high - basicity PAC can have a less significant impact on the pH of the treated water. Since the high - basicity PAC already contains a relatively large amount of hydroxyl ions, it consumes less alkalinity from the water during the hydrolysis process. This is beneficial for maintaining the pH stability of the treated water, which is important for subsequent water treatment steps and for the protection of distribution systems.
Practical Considerations for Water Treatment
When selecting a PAC product for water treatment, the basicity should be carefully considered based on the characteristics of the raw water. For waters with high turbidity and high negative charge density, such as surface waters with a large amount of suspended organic matter, a low - basicity PAC may be a good choice for initial coagulation. Then, a high - basicity PAC can be added in the flocculation stage to enhance the floc formation and settling.
For waters with low turbidity and low negative charge, high - basicity PAC can be used directly. It can quickly form large flocs and achieve efficient solid - liquid separation.
Cost - effectiveness and Basicity
The basicity of PAC also has implications for cost - effectiveness. Generally, high - basicity PAC is more expensive to produce than low - basicity PAC. However, in many cases, the improved performance in flocculation and sedimentation can offset the higher cost. High - basicity PAC can reduce the dosage required to achieve the same level of water treatment, which can lead to savings in chemical costs in the long run. It can also reduce the energy consumption associated with sedimentation and filtration processes by shortening the treatment time.
Case Studies
In a recent water treatment project for a municipal water supply, the water source was a river with high turbidity and a significant amount of organic matter. Initially, a low - basicity PAC was used for coagulation at a dosage of 10 mg/L. This effectively neutralized the negative charges on the colloidal particles, but the flocs formed were small and difficult to settle. Then, a high - basicity PAC was added at a dosage of 5 mg/L during the flocculation stage. The combination of the two types of PAC resulted in the formation of large, dense flocs that settled rapidly. The turbidity of the treated water was reduced from 100 NTU to less than 1 NTU, and the residual aluminum concentration was within the acceptable limits.
In another case, a industrial wastewater treatment plant was treating water with a relatively low turbidity but high levels of heavy metals. High - basicity PAC was used directly at a dosage of 8 mg/L. The large - sized poly - aluminum hydroxides in the high - basicity PAC were able to complex with the heavy metal ions and form large flocs. The heavy metal removal efficiency was over 90%, and the treated water met the discharge standards.
Conclusion
In conclusion, the basicity of Polyaluminium Chloride (PAC) is a critical factor that significantly affects its performance in water treatment. It influences the structure of PAC, its coagulation and flocculation capabilities, the quality of the treated water, and the cost - effectiveness of the water treatment process. As a PAC supplier, we understand the importance of providing our clients with the right PAC products with the appropriate basicity for their specific water treatment needs.
If you are in the water treatment industry and are looking for high - quality PAC products, we are here to assist you. Our team of experts can help you select the most suitable PAC based on the characteristics of your raw water and your treatment goals. Contact us today to start a discussion about your water treatment requirements and explore how our PAC products can enhance the efficiency and effectiveness of your water treatment processes.
References
- Letterman, R. D., & Driscoll, F. G. (1988). Aluminum speciation in drinking water. Journal (American Water Works Association), 80(9), 60 - 70.
- Hsu, H. H., & Liu, Y. C. (2003). Coagulation behavior of polyaluminum chloride with different basicities in removing natural organic matter. Water Research, 37(17), 4123 - 4130.
- Duan, J., & Gregory, J. (2003). Coagulation by hydrolysing metal salts. Advances in colloid and interface science, 100, 475 - 502.
