Precautions For Naphthalene Series High-efficiency Water Reducing Agent

May 12, 2024

Leave a message

4. Things to note:
1. When using porous aggregate, it is advisable to add water and stir first, then add water-reducing agent.
2. When the slump is large, attention should be paid to the vibrating time not to be too long to prevent bleeding and delamination.
Naphthalene series superplasticizers can be divided into high-concentration products (Na2SO4 content <3%), medium-concentration products (Na2SO4 content 3% to 10%) and low-concentration products (Na2SO4 content) according to the Na2SO4 content in their products. Content>10%). Most naphthalene-based high-efficiency superplasticizer synthesis plants have the ability to control the Na2SO4 content below 3%, and some advanced companies can even control it below 0.4%.
Naphthalene-based water-reducing agents are the most produced and widely used high-efficiency water-reducing agents in my country (accounting for more than 70% of the water-reducing agent dosage). They are characterized by high water-reducing rates (15% to 25%) and no air entrainment. , has little impact on the setting time, has relatively good adaptability to cement, can be used in combination with various other admixtures, and is relatively cheap. Naphthalene-based superplasticizers are often used to prepare high-fluidity, high-strength, and high-performance concrete. The slump loss of concrete simply mixed with naphthalene-based superplasticizer is faster. In addition, the adaptability of naphthalene-based water reducing agents to certain cements needs to be improved.