Concrete Admixture Properties

Apr 28, 2024

Leave a message

The initial use of admixtures was just to save cement. With the development of construction technology, the use of admixtures has become the main measure to improve the performance of concrete.
Thanks to the high-efficiency water-reducing agent, high-fluidity concrete, self-compacting concrete, and high-strength concrete have been applied; thanks to the thickening agent, the performance of underwater concrete has been improved; thanks to the retarder, the setting time of cement has been extended , it is possible to reduce the slump loss and extend the construction operation time: due to the antifreeze, the freezing point of the solution can be lowered, or the deformation of the ice crystal structure will not cause freezing damage. Only then can construction be carried out at negative temperatures.
Generally speaking, admixtures have the following functions in improving the properties of concrete:
(1) It can reduce the water consumption of concrete. Or it can increase the fluidity of concrete without increasing water consumption.
(2) The setting time of concrete can be adjusted.
(3) Reduce bleeding and segregation. Improve workability and water elution resistance.
(4) It can reduce slump loss and increase the pumpability of pumped concrete.
(5) It can reduce shrinkage. Adding expansion agent can also compensate for shrinkage.
(6) Delay the initial hydration heat of concrete. Reduce the temperature rise rate of large-volume concrete and reduce the occurrence of cracks.
(7) Improve the early strength of concrete and prevent freezing at negative temperatures.
(8) Improve strength, increase frost resistance, impermeability, wear resistance and corrosion resistance.
(9) Control the alkali-aggregate reaction. Prevent the corrosion of steel bars and reduce the diffusion of chloride ions.
(10) Made into concrete with other special properties.
(11) Reduce the viscosity coefficient of concrete, etc.
After adding admixtures to concrete, the effects will be different due to different types. Most of them are physical effects, such as adsorbing on the surface of cement particles to form an adsorption film, changing the potential, and producing different suction or repulsion forces; some will cause damage. The flocculation structure improves the stability of the cement diffusion system and improves the conditions for cement hydration: some can form macromolecular structures and change the adsorption state on the surface of cement particles; some can reduce the surface tension and surface energy of water, etc.: and a few Directly participates in chemical reactions and generates new compounds with cement.
Since admixtures can effectively improve the properties of concrete and have good economic benefits, they have been widely used in many countries and have become an indispensable material in concrete. Especially with the use of high-efficiency water-reducing agents, cement particles can be fully dispersed, water consumption is greatly reduced, and cement potential is fully utilized. As a result, the cement stone is denser, and the pore structure and interface zone microstructure are well improved, thus making The physical and mechanical properties of concrete have been greatly improved. Whether it is impermeability, chloride ion diffusion, carbonization, resistance to sulfate erosion, impact resistance, wear resistance and other aspects, it is better than concrete without additives. It not only increases the strength and improves workability, but also improves the durability of concrete. Only by adding high-efficiency water-reducing admixtures, it is possible to prepare high-performance concrete with high workability, high strength and high durability.