Uses of Polycarboxylate Superplasticizer PCE Liquid Water Reducing Agent:
Polycarboxylate Superplasticizer PCE Liquid Water Reducing Agent product is applicable to ordinary concrete, high-strength concrete, high-performance concrete, underwater pouring concrete, self-compacting concrete, fluid concrete, large admixture concrete and various grouting materials and self-leveling mortar materials. When used in concrete, Polycarboxylate Superplasticizer PCE Liquid Water Reducing Agent can improve work performance, reduce the rate of hydration heat release, enhance concrete strength, prevent the occurrence of temperature stress cracks, and improve fracture toughness and durability.
Our Polycarboxylate Superplasticizer PCE Liquid Water Reducing Agent product uses raw materials of different molecular weights, which has increased the water reduction rate and enhanced the slump retention.

Characteristics of Polycarboxylate Superplasticizer PCE Liquid Water Reducing Agent:
Early and high strength:
Polycarboxylate Superplasticizer PCE Liquid Water Reducing Agent can enhance the early strength as well as the strength at all subsequent ages of the concrete.
Excellent adaptability:
The cement and admixture of Polycarboxylate Superplasticizer PCE Liquid Water Reducing Agent have good compatibility, good temperature adaptability, and excellent compatibility with different types of cement and admixtures.
Low slump loss:
Polycarboxylate Superplasticizer PCE Liquid Water Reducing Agent meets the standards for pumping agents, with a significant reduction in slump loss.
High durability:
Polycarboxylate Superplasticizer PCE Liquid Water Reducing Agent can effectively reduce the water-cement ratio of concrete, enhance durability, and minimize shrinkage and creep.
High water reduction rate:
When the slump is around 80mm, the water reduction rate of Polycarboxylate Superplasticizer PCE Liquid Water Reducing Agent can be over 25%; when the slump is around 200mm, the water reduction rate can be over 30%.
Green and Environmentally Friendly Product:
During the production process of Polycarboxylate Superplasticizer PCE Liquid Water Reducing Agent, no pollution to the natural environment is generated, and it complies with the international IS014000 standard for environmental protection management.

the specifications of Polycarboxylate Superplasticizer PCE Liquid Water Reducing Agent:
| Item | Standard |
| Appearance | Transprarent Liquid |
| Density(23℃)(g/cm³) | 1.10±0.02 |
| pH(23℃) | 7.0±1.0 |
| Solid Content | 50.0±2.0 |
| Chloride ion content (%) | ≤ 0.20 |
| Na2SO₄ Content(%) | <4.0 |
| Na₂O+0.658K₂0(%) | <2.0 |
| Water-soluble | Quite good |
| Performance Index-Dosage | 0.50±0.05 |
| Cement paste fluidity (mm) | ≥240 |
| Mortar water reducing rate (%) | >20 |
Recommended dosage of Polycarboxylate Superplasticizer PCE Liquid Water Reducing Agent:
The recommended dosage of Polycarboxylate Superplasticizer PCE Liquid Water Reducing Agent: in concrete is as follows (in terms of the mass percentage of the binder material used): 0.8% to 1.2%.
Usage method of Polycarboxylate Superplasticizer PCE Liquid Water Reducing Agent:
1. According to the design requirements of the concrete, after conducting experiments to adjust the water usage and sand ratio, the dosage of the Polycarboxylate Superplasticizer PCE Liquid water reducer was determined so as to ensure that the slump, strength and setting time all meet the standards.
2. This product Polycarboxylate Superplasticizer PCE Liquid water reducing agent is applicable to ordinary concrete, high-performance concrete, high-strength concrete, and large-flowing concrete. When used for concrete with a strength of C50 or above, it is necessary to select the raw materials in accordance with relevant technical specifications, determine the appropriate mixing process, and obtain a certain amount of test data. The flowability of the produced concrete should meet the construction requirements, and the concrete strength should have a certain safety margin.
3. This product Polycarboxylate Superplasticizer PCE Liquid Water Reducing Agent can be mixed with the water used for mixing and added to the concrete at the same time. The effect is even better when it is added after the water has been added to the concrete.


Welcome your inquiry




